NMFRC
 

NCMSCompliance Assistance Centers

Funded by EPA
through a Cooperative Agreement

EPA

Disclaimer
The information contained in this site is provided for your review and convenience. It is not intended to provide legal advice with respect to any federal, state, or local regulation. You should consult with legal counsel and appropriate authorities before interpreting any regulations or undertaking any specific course of action.

Ask the Expert Question-and-Answer Archive
(Hard Chrome Plating)

by Randy Taylor, Advanced Tooling Corporation.
August, 2006

Labor-Intensive Masking Alternatives

Q. I work as a methods analyst supporting a hard chrome line. We use a very extensive and time consuming method of Masking with lead tape all non plated surfaces followed by plastic tape, on some areas where we cannot use plastic tape as our secondary tape we use stop-off lacquer. Our gears and journal bearing surfaces and thickness requirements have our parts in the tank for as long as 26 hours in some instances. So chromic acid attack is extensive unless we use these heavy masking methods. Are you aware of other tapes than lead/plastic that do a good job at standing up to the chromic acid and a delivery means that would in some cases take us from an order qty of 10 for up to 6 hours down below three (50% gain or better?). Or are you aware of tape cutting by computer program to enhance the speed? Any ideas are welcomed. Thank you in advance.

A. Hard Chrome plating is historically "labor intensive". If it wasn't for the superior wear, extended service life, and many of the other great characteristics of hard chrome, or the fact that your customer won't take "No" for an answer, one might conclude that often, "it's not worth the effort!"

I come from a long line of "hard chrome platers" and there aren't many new, exciting or innovative ways to "skin a cat" around a chrome tank these days. On the brighter side, however, I happen to be part of a company which is dedicated to making the plating & masking process easier and more operator friendly. Our background is primarily with aerospace and aircraft "Hard chrome process optimization", but ATC covers many other industrial hard chrome categories. Most masking techniques we've all learned from the old timers. These techniques vary widely from job to job, and generally do the trick. But even the "old timer's" might be surprised to see how far some of our latest processing techniques have actually come.

I'd like to help you, if I can. Let me start by saying that the real answers you seek, may not necessarily come from better masking materials or taping techniques, but rather, affective use of DC current, conforming anodes, properly sized contact areas, state of the art rectifiers, well designed and built plating racks and frames, and a variety of shields, robbers, thieves as well as "no mask" tooling and fixturing techniques.

My true calling is hard chrome consulting, and when I'm not answering questions on line at the NMFRC "Ask the expert" website, I run a company called Advanced Tooling Corporation, in Middlefield, Ohio. We also have a sales and information office in Scottville, VA. ATC has helped dozens of companies around the country, improve their hard chroming skills, from masking, through proper anoding, tooling, fixturing , bath analysis, troubleshooting, environmental issues and a very special product line we call "no mask anodes".

Let me know if I've helped to answer your question? Your certainly not alone out there, there is much information and training available, however, that will improve hard chrome productivity and quality. The bottom line in our ever changing industry, is doing it better, faster, cleaner, "greener", and more profitable.



| Compliance Assistance | Regulations | Directories | Resources | Hot Topics | News | Ask the Experts | Library | Online Training | About NMFRC | Search | Home |

NMFRC